Practical Stuff
Nespresso Capsule Dispenser (4 Boxes; No Support; No Infill; Remix)
I wanted to print this: https://www.thingiverse.com/thing:2817916 but my printer isn't big enough for a version with support for 5 boxes.
So i removed one and also changed the bottom a bit so it can be printed without support and without infill.
Double Lamp Wall Mount
Wall Mount for two heads of old Clip Lamps.
I've used a Tesa Posterstrip to attach it to the wall and it seams to hold just fine. And with LED bulbs it doesn't get hot either.
The inside diameter (where the lamps are placed) is 50mm.
Notes: FreeCAD file is included.
Cable Clips for Tesa Powerstrips
Cable Clips which are the perfect size to be attached with Tesa Powerstrips (the big ones).
Notes: FreeCAD file is included.
LINNMON Table / KALLAX Shelf - Connecting Fitting & Cable Guides
Connecting fitting to combine a LINNMON Table with a KALLAX Shelf Unit. The metal pieces supplied by Ikea do not work if you want to connect the Table to the topmost board of the shelf because it is much thicker.
Also some clip-on cable guides.
Required are 8 Wood Screws per piece for the fitting.
Notes: FreeCAD file is included.
